Reduce Business Costs with Rainwater Harvesting
Regions that benefit from heavy rain, as well as regions that benefit from sporadic rain, can significantly reduce their water expenses by implementing a rainwater harvesting system.
A process of treatment and sterilization is necessary to make rainwater compliant with regulations and safe to use for your business.
Although rainwater appears to be clean to the naked eye, it is not safe to use until treated as it poses a risk to staff exposed to it. This pathogen-rich rainwater can cause sickness or infections if it comes into contact with open wounds or ingested.
Cleanawater offers two primary sanitization options for rainwater:
- Chlorine Treatment. This is an excellent solution when treated rainwater will be stored for later use, and in general industrial applications.
- Ultraviolet Light Treatment. UV light is an alternative to chlorine treatment. It reduces risk to industrial applications sensitive to corrosion caused by even a low dose of chlorine, and is an instantaneous santization method.
Cleanawater supplies packaged, low maintenance rainwater harvesting solutions to suit all inground and above ground rainwater harvesting applications.
Start reducing your water bills immediately.
Rainwater harvesting is a great opportunity for businesses who want to reduce operating costs.
Business Applications and Solutions
Example 1: Aluminium Parts Wash Down
A business located in a tropical, heavy rainfall region wants to install a rainwater harvesting system to reduce their water expenses. Collected rainwater will be used immediately after treatment to wash down parts, some of which are made of uncoated aluminium.
A rainwater harvesting system that uses UV light sterilisation is recommended. The end application of washing down uncoated aluminium means that chlorine poses a corrosion risk, even at low dosing levels.
Example 2: Car Wash
A car wash in Queensland wishes to take advantage of their tropical climate, and will use captured rainwater to wash cars.
Rainwater is to be stored and used in the months following rain events. Systems automatically switch between harvested water for car washing and mains water depending on tank storage levels.
A rainwater harvesting system that uses chlorine for rainwater sanitation is recommended. As the treated water is not used immediately, a UV light approach is not suitable and storage tanks may harbour bacteria when stagnant.
Chlorine present in the water is not an issue given the intended application. The business can safely store rainwater for an extended period of time. This solution an excellent alternative or addition to a water recycling system, which eliminates reliance on mains water.
Rainwater may contain pollution, animal excrement and other particles which are harmful to humans, plants and animals. Therefore collected rainwater needs to be treated before it is safe to use for business.
There are two primary steps to rainwater treatment: filtration and sterilization using chlorine or UV light.
The first step involves removing sediment and small particles.
Rainwater harvested from roofs travels down a pipe into a storage tank or pit. Dense sediment will settle at the bottom of the tank. A float switch triggers the operation of the system to commence pumping or a pressure drop inline indicates the need to treat and transfer water instantaneously.
Filtration consists of removing 1-5 micron solids via a cartirdge, screen or sand filter prior to sanitization. Filters also have the option to be self cleaning.
Adding chlorine to water is a simple and effective way to sterilise filtered rainwater.
The Victorian Government Department of Human Services recommends the following chlorine dosage and concentration:
- The initial dosage to be a minimum of 5 milligrams of chlorine per litre of rainwater to be treated.
- A concentration of 0.5 milligrams of chlorine for every 1 litre of rainwater must be maintained, 30 minutes after the initial dose.
Therefore for a 50L tank of rainwater, a total of 250mg of chlorine is needed for sterilization. Then 30 minutes after the initial dose, the concentration must be maintained at 25mg of chlorine per litre.
Advantages of Chlorine Sterilisation
- Chlorine treatment is an ideal solution for rainwater that needs to be stored for future use.
- Rainwater is compliant with the treatment regulations at all times, as a sampling pump will automatically regulate the appropriate chlorine concentration.
Ultraviolet light is an alternative method of sterilization. It works by disrupting and damaging pathogens’ cells.
UV light sterilization requires rainwater to be virtually free of any large sediment. If the rainwater has not been filtered, 'shadowing' can occur, whereby sediment blocks the UV light rays, reducing the effectiveness of sterilization.
Advantages of UV Sterilisation
- Ultraviolet lights bulbs have a lifespan of 12 month to 2 years.
- UV units can handle large flow rates.
- UV light treated water can be used immediately after it finishes treatment.
- Rainwater treated with UV is less of a corrosion risk to exposed metal.
Rainwater harvesting is a great opportunity for businesses aiming to reduce operating costs.
It is often unknown that collected rainwater isn’t immediately safe to use. A Cleanawater Rainwater Harvesting system will help you both capture and treat rainwater for your business.
Cleanawater's packaged range of Rainwater Harvesting systems are cost effective, portable and ideally suited for your harvesting application.
Call us today on 1800 353 788 to discuss how your business can save water.
Cleanawater on 19 November 2014
The term “wastewater” doesn’t have particularly appealing connotations. In areas of the world where water appears to ...Read more
Cleanawater on 19 November 2014
It’s no secret that many industries are facing water shortage issues. For car wash operators, this is a particularly important issue as your business is reliant on water ...Read more